• Easy-to-spread
• Latex-based
• For the interior, direct glue-down installation of non-vinyl-backed carpet

• LokDots™ adhesive dot sleeve
• No moisture testing required
• 250 sq. yd./sleeve
• 8 rolls / sleeve (3 lbs.)
• 12 sleeves / case (31 lbs.)
• 10 lb s. / 95% / 12 pH
• Limited Warranty Info
• Installation Instructions

• 11/16" Concrete Tack Strip for new construction 
• 45 ctns per pallet
• 5/8" Heavy Duty Concrete Tack Strip for remodel/old concrete
• 50 ctns per pallet

• 125 sq. yd./sleeve
• 4 rolls/sleeve (2 lbs.)
• 24 sleeves/case (31 lbs.)
• No moisture test required/No cap
• Limited Warranty Info
• Installation Instructions

• Wood Tack Strip 3/4" Nail for wood subfloors
• 45 ctns per pallet

• LokDots™ applicator
• Impact resisitant plastic casing

• Multipurpose adhesive
• 8 – 10 yd./gal. with 1/8" × 1/8" × 1/8" U-notch trowel
• 4 gal.
• 43 lbs. (48 / pallet)
• 5 lbs. / 85% RH

• Use to install cork underlayment
• Solvent free, low VOC
• Fast grab, superior strength
• Excellent working time
• 4-gal. pail

• Universal indoor/outdoor adhesive
• Suitable for indoor/outdoor products in residential, light commercial traffic, walk off and entry ways
• Light commercial traffic, residential, walk off and entryway BL: 8– 10 sq. yd./gal. with 1/8 × 1/8" × 1/8" U-notch trowel
• Walk off, entryway TL: 12 - 15 sq. yd./gal. with 1/16" × 1/16" × 1/16" square notch trowel
• 45 lbs. (48/pallet)
• 8 lbs. 90% RH*
• 1-year warranty
• 4 gal.

• Broadloom seam sealer
• 550 - 600 lin ft. / qt.
• 1 quart 22 lbs. (12 qts. / case)

• Pressure-sensitive high moisture adhesive for modular products
• 35 -40 yd./gal. with paint roller
• 28 – 33 yd./gal. with 1/16" × 1/32" × 5/64" U-notch trowel
• 4 gallons
• 36 lbs. (48/pallet)
• 10 lbs./95% RH/8 - 10 pH

• Pressure-sensitive adhesive for modular products
• 35 -40 yd./gal. with paint roller
• 28 – 33 yd./gal. with 1/16" × 1/32" × 5/64" U-notch trowel
• 4 gal.
• 39 lbs. (48/pallet)
• 10 lbs./95% RH

• Moisture impervious carpet seam sealer
• 38-50 linear feet
• 8-oz. bottle
• 8.5 lbs (12/case)

• Anchors pad to any surface
• Prevents slippage during power-stretching
• Dries fast

• Permanently seam edges and cross-joints
• Not recommended for vinyl-backed carpets

• 1 3/8" Profile 
• Mill Finish
• 4ft Length to Match Tack Strip
• Used to Roll and Tuck Carpet Edge for Finished Appearance