• Roll-on resilient adhesive
• Approved for 95% rH and a pH between 8.0-11.0
• 6 hour working time
• 350-400 SF/gal 1400-1600 SF/4 gal bucket
• Approved dry-back LVT/LVP products

• One spray application product, designed to penetrate 2-4mm inside the paste layer of concrete, creating a permanent barrier
• For use on Concrete Surface Profiles of 2-3
• No testing required prior to application
• 225 SF/gal (900 SF/bucket)
• Resealable pail up to 4 applications

• 2-part epoxy that dries to a semi-gloss grey finish  
• Up to 25 lbs. CC and 100% RH – no moisture testing required 
• Up to 14 pH – no testing required 
• 300-350 SF/kit - 1/8” x 1/8” x 1/8” V-notch squeegee    

• Water-based 2-part barrier primer
• Cures in 4-6 hours
• RH > 99% (ASTM F-2170), provided the site is absent of hydrostatic pressure
• CaCl/MVER-14 lbs (ASTM F-1869)
• 14ph-(ASTM F710)
• 150 SF/gal (4 gallon kit=600 SF/kit)

• Fast, aggressive tack 
• Fast-drying 
• One-step application
• Reduces installation time and cost 
• Can be used for commercial and residential
• No cap, no test when used with an exterior-rated prep
   

• Interior and Exterior
• Installer friendly
• Initial set in 1/2 hour
• Compatible bond with all floor covering adhesives
• Ideal for patching and leveling from featheredge to 1/2"
• 32.5-35 SF/bag on 1/8" application 
• 25-lb. bag / 96 per pallet

•    LVP / LVT Adhesive
•    Firm setting transitional adhesive
•    Extended flash time
•    Greenguard Certified
•    140 – 225 s.f. /gal spread rate
•    12 lbs. or 99% RH
•    1 and 4 gal pails
•    48 pails per pallet

• Approved for many types of flooring (Sheet goods, LVT/LVP, Rubber, Cork-backed hard surface and underlayment, etc)
• RH < 99% (ASTM F2170) or 12 lbs (ASTM 1869)
• 150-180 SF/gal on 1/16" Square notch trowel

•    For use with hardwood, Vinyl, laminate flooring and carpet tile
•    Reduces moisture vapor transmission
•    For RH < 90% or 15lbs
•    Solvent free & VOC free
•    Easy clean up when wet
•    300 - 350 s.f. per unit
•    Two-part Epoxy for use on concrete subfloors

•    Premium urethane wood flooring adhesive
•    No subfloor moisture testing required
•    Ultimate moisture & sound control
•    Ideal for high moisture content slabs
•    Crack suppressant
•    Low odor - VOC compliant
•    Clip-on trowel blade provided with each pail
•    Excellent green strength
•    35 s.f. /gal with enclosed trowel blade, 60 s.f./gal as adhesive only
•    4 gal pail
•    36 pails per pallet

Now you can install almost any flooring with one adhesive, saving storage space and reducing waste.SHAW 4151 tolerates moisture up to 99% RH.
• Saves Storage Space: Shaw 4151 will work for any flooring except for patterned broadloom. Only store one adhesive.
• Reduces Waste: Shaw 4151 comes in a re-sealable bucket. You can re-seal up to two times, preventing waste.
• Releasable or Permanent: Install when dry and clear for releasable adhesion; install when wet for permanent adhesion.
• Moisture Tolerant: 4151 can withstand up to 99% RH and 12 pH.

• Use for Luxury Vinyl Tile and Plank, Fiberglass sheet goods and PVC backed Carpet Tile
• Superior tack
• Extended working time
• High-strength, water-resistant bond
• LEED v4 contributing
• Bond warranty up to 99% RH and 12 pH

• Concrete cleaner and heavy-duty etching agent
• Can be used as an alternate to grinding/shot blasting
• Can prepare substrate for MoistureShield or MoistureTek 
• Approximately 225 SF/gal (900SF/bucket)